Zhejiang Chaolian Electronic Co., Ltd.
Tel: +86-574-63939781 E-mail: sales@sur-link.com
Fiber Optic Splicers SL05FSEH01
Similar Products
  • Network Cabinet SL08WMC02

    Description: Double Section Wall Mounted CabinetDETAIL: The Double Section Provides An Easy Access To The Cabinet To The Rear Of All Mounted Cabinets. A Swing Frame Construction Adds To Th...

  • Fiber Test Equipment SL0805B01

    Description: optical fiber end face detectorBrief introduction:1. optical fiber end face detector with a high stability of the image monitor (10-inch display)2. is designed to detect the quality, clea...

  • Fiber Distribution SLDB50P-I01

    Description: 50 Pair Indoor Distribution Box Installed 5pair back mount frameORDERING INFORMATION:Product CodeDescriptionPackagingCarton SizeGWSLDB50P-I01--------

Fiber Optic Splicers SL05FSEH01

Fiber Optic Splicers SL05FSEH01 Product model:


Fiber Optic Splicers SL05FSEH01 Description:

Fiber Splicing Enclosure Horizontal type

Horizontal type Fiber Optic Splice Closure with two inlets/outlets:
Innovative design is the horizontal type with one hinge on one side and opens on another side. It is the most reliable FOSC with the simplest installation in the world. The FOSC is suitable for protecting fiber cable splices in straight-through and branching applications. Based on an advanced formula, the plastic parts are made of injection-molded, high-strength engineering plastic ABS or PC by numerical control equipment; therefore effectively prevent products from aging caused by coldness, heat, oxygen and ultraviolet radiation. The strong housing and main components provide fire resistant, waterproof, and quakeproof while protecting splices during pulling, compressing, and impacting, bending, tensioning, axial tensioning.
It ensures long-term reliability and usage under an ambient temperature from -40℃ to +75℃.

Purpose: aerial, direct-burying, wall-mounting, Pipeline laying way
Structure: open structure
Material: ABS/PC
Size: 48.5*18*12CM
Inlet Cable Hole: Max Dia 15MM
Maximum capacity: 96cores
Span-life: 30 years.
Components: Seal tape, Insulation tape, Nylon tie, optical cable heat shrinkable
sleeve, mental hook, seal fittings, numeral bar, retaining ring.
Environmental temperature: -40℃ to +75℃
Atmospheric pressure: 70∽106KPa
Optic property: The spare fiber coiled in the fiber emplacing device; the fiber
connector won’t attenuate during the FOSC installation operation
Seal Performance:
After the closures are sealed, then pressurized up to 100KPa±5KPa in water, immersed in 15 minutes, there are no air bubbles; Or observed for 24 hours, there is no change of air pressure.
Re-encapsulation Performance: The closures are pressurized up to 100KPa±5KPa in water, immersed in 15 minutes, there are no air bubbles; Or observed for 24 hours, there is no change of air pressure after three times of repeat encapsulation.
Voltage-resistance strength: Under the effect of 15kv/DC/1min, non-puncture, and no arc-over.
Insulation resistance: ≥2X104MΩ
It is widely used for communication, network system, cabled T.V. of CATV, the fiber optic cable by the network.
Uses and properties:
It is belonged to open structure airproof tie-in system of machine pressure.
It is used for the protective connection between two or more optical cables
Suitable for single core fiber optic cable and ribbon fiber optic cable
Main Technical Indexes:
1.  Airproof performance: Airing pressure inside box 100Kpa, pointer immovability after 24 hours or no air bell within 15min when parked in the common temperature water.
2.  Re-encapsulation performance: no change in the index of air-proof performance after three times of repeat encapsulation.


Product Code



Carton Size



Fiber Splicing Enclosure Horizontal type


48.5*18*12 cm


Leave a Message Email Us

we will contact you within 24 hours.