Zhejiang Chaolian Electronic Co., Ltd.
Tel: +86-574-63939781 E-mail: sales@sur-link.com
Fiber Test Equipment SL0810FS-80S
Similar Products
  • Cable Faceplate SFP-1I2101

    Description:Faceplate,86 Type, 2 portNOTES:1. Material: FLAME RETARDANCY ABS UL94V2. Retentiveness of insertion structure: 50N 60±5s3. BURR: 0.05mm MAXINFORMATION:Product CodeDescriptionPackag...

  • Patch Panel SPP-2932B1-2

    Product model:SPP-2932B1Description:UTP Cat.6 Patch Panel,12 portNOTES:ELECTRICAL:1. Voltage rating: 125 VAC RMS2. Current rating: 1.5 AMP3. Contact resistance: 20 Milliohms MAX4. Insulation resistanc...

  • Splicing Fiber Cable SL04DCS2S32FL5

    Description: Dual-Core Self-support Covered Wire CableDetailed DescriptionProduct Name: Dual-Core Self-support Covered Wire CableApplication:Characteristics:Technical Parameters:Cable CountOut sheathD...

Fiber Test Equipment SL0810FS-80S

Fiber Test Equipment SL0810FS-80S Product model:


Fiber Test Equipment SL0810FS-80S Description:

Fujikura fsm-80S Splicing machine Fusion Splicer

The FSM-80S is core-to-core alignment single fiber splicer succeeding to FSM-60S. In addition to ruggedized concept, which 60S created, the 80S has a series of new features, such as "Automated wind-protector and tube-heater" for quicker splicing cycle as well as fewer operation steps, "innovative carrying-case design" for
quicker preparation, "powerful Li-ion battey" for longer operation, high resolution bigger LCD monitor, and "built-in operation manuals" in various languages. Market is from backbone network installation to opto-electronics components production for quality splice.

Applicable fibres

SM (ITU-T G.652 & G.657), MM (ITU-T G.651),DS (ITU-T G.653),
NZDS (ITU-T G.655),Others

Fibre Count


Cladding diameter

80 to 150μm

Coating diameter

100 to 1000μm

Fibre cleaved length

5 to 16mm using Sheath Clamp A, B or 5 to13mm using FH-60-250, FH-60-900

Actual average splice loss

0.02dB with SM, 0.01dB with MM, 0.04dB with DS, 0.04dB with NZDS.

Splice time

7sec:SM FAST mode, 12sec :SM AUTO mode, 15sec:AUTO mode

Return loss

60dB or greater

Splicing modes

100 splicer modes are available

Splice loss estimate

Several types of core deformations as well as core axis offset are taken into account for accurate loss estimate.

Attenuation splice function

Intentional high splice loss of 0.1dB to 15dB (0.01dB step) can be made for an
inline fixed attenuator

Storage of splice result

The last 2000 results to be stored in the internal memory.


X / Y (300X magnification), or both X and Y simultaneously (160X magnification)

Viewing method

By two CMOS cameras for intersecting fiber viewing and 4.73 inches TFT colour LCD monitor

Tension test

1.96 to 2.25N

Operating condition

0-5000m above sea level, 0-95% RH and -10 to 50°C respectively.

Tube heater

Built-in auto-start tube heater with 10 heating modes and up to 20 for reference

Tube heat time

13-15sec. with FP-03 protection sleeve. Total memory of 30 heating modes are available

Applicable protection
sleeve length

60mm, 40mm and a series of micro sleeves.

No. of splice/heating
with battery

200 times of splicing and heat shrinking under with BTR-09

Power supply

Auto voltage selection from 100 to 240Va.c. or 10 to 15Vd.c. with ADC-18. 14.8Vd.c. with BTR-09


USB2.0 ( Mini-B) for data and video signal transfer to PC.

Wind protection

Up to 15m/s wind velocity


146(W) x 159(D) x 150(H) mm

Including wind protector, monitor, and rubber protector

Excluding rubber foot


2.5 kg, with ADC-18 AC adaptor

2.7 kg, with BTR-09 battery

Electrode life

3000 arc-discharges

Leave a Message Email Us

we will contact you within 24 hours.